Heavy
Duty Powertrain Inc.
5090 N. Oak Road
Davison, MI 48423
Website Address:
www.heavydutypowertrain.com
Email:
sales@heavydutypowertrain.com
Parts Department Toll Free 1.866.866.0328
ECM Tech Support (810) 653.6300
9:00am to 9:00pm est. (Open 7 Days a Week)
Español Translation
(904) 742.8176 Al Ortiz
Got a L10, M11 or N14 Fault Code or Question?
Give Us a Call at NO CHARGE & We'll Tell You What It Means
TOLL FREE 1.866.866.0328
Parts 810.653.6300...Terry
Chron
Cummins L10, M11 & N14 ECM Before You Install
Your ECM Tips 10yrs
Experience...by Terry Chron
Troubleshooting Videos, Including Explanation of Fault Codes & more!
Secure On Line Shopping!
This
Month's Featured Product!
THIS
MONTH'S
SPECIAL
OFFER!
Eaton MD
200
Mobile
Diagnostic
Kit
Part#…SCKIT01
Special
Price
$1050.00
Diagnose
Truck
Fault
Codes
For
Caterpillar,
Cummins,
Diesel,
International,
Mack &
more
Fault
Codes
(No
additional
cartridges
to buy,
misplace
or share)
SNAPSHOTS BELOW:
Vehicle Diagnostic Scanner
Compatible With All Heavy Duty & Medium Duty Diesel Electronic Engines
Affordable & Easy-to-Use • Monitor Multiple Components at the Same Time • For All Vehicle Makes and Models with J1587/J1708 or Truck Data Links
This MD-200 Series tool is a rugged handheld device that offers a low-cost option to assist in the maintenance, troubleshooting and repair of today’s electronically controlled truck components.
Features
Scan tool provides quick, accurate electronic diagnostics – with no functional cartridges to misplace or share
The only tool on the market that monitors multiple truck system components simultaneously – eliminating the need to swap cartridges to read each component
Portable, self-powered unit does not need to be connected to vehicle for power
New diagnostic functions and updates can be quickly downloaded via the Web – no need to wait for new cartridges to be shipped
Guaranteed performance with a one year warranty
Compatible Standards
J1587/J1708 (Includes 6 & 9 Pin Deutsch Cable Connector)
Optional: OBD2 to 9 pin Cable adaptor (Required for most mid size diesel engines)
This MD-200 Series tool is a rugged handheld device that provides the power and performance off our different diagnostic tools to assist in the maintenance, troubleshooting and repair of today's electronically controlled truck components. Four different tools in one device provides quick, accurate electronic diagnostics – with no functional cartridges to misplace or share. The only tool on the market that monitors multiple truck system components simultaneously – eliminating the need to swap cartridges to read each component. the MD-200 will read fault codes for all major electronic diesel engines including Cat, Cummins, & more. The Model MD-200 will also read fault codes for Eaton Automatic Transmissions
Additional Connectors, Protocols and Cabling
Every vehicle is equipped with a diagnostic connector. Although vehicles may have identical connectors, such as a 9-pin Deutsch, they can have different protocols and therefore may not work with the same diagnostic tools.
The following matrix outlines the capability between connectors, protocols and cabling.
Special Function Cabling
Description
9-pin Serial PC Cable
Part number: VL-CBL-01
Standard with all Vehicle Link Adapter Kits (MD-100)
RJ45
For downloading data from MD-200 to PC
Part number: PC-CBL-01
Standard with all MD-200
Programming Cable
For programming MD-200, adding features, and upgrading versions
Part number: PC-CBL-02
Standard with all MD-200
Link Tester Cable
For testing J1939 Data Link
Part number: LT-CBL-01
Sold with Link Tester Only
Q&A's
Does the MD 200 let you change parameter settings? The MD 200 only lets you read them.
Does the MD 200 require cartridges for different truck applications?
The MD 200 does not require cartridges for different truck applications. The MD 200 contains the necessary information to access different vehicles within its system.
How is the MD 200 Powered?
The MD 200 is a self-powered unit that does not need to be connected to vehicle for power.
How are software updates handled?
The MD 200 can be updated via a computer through the internet.
Please Note:
ALL OEM MANUFACTURERS PICTURES, NAMES, NUMBERS AND
DESCRIPTIONS ARE USED FOR REFERENCE ONLY AND DO NOT IMPLY THAT ANY PART
OF OUR PARTS ARE PRODUCTS OF ORIGINAL EQUIPMENT MANUFACTURER.
Heavy Duty Powertrain Customer ECM
Email Replies:
HDP
L10,
M11 & N14 ECM Product & Service Reviews
Customer Problem: Stranded in Florida
Engine won't start & no power to the fuel solenoid.
Customer email reply:
Hi Terry
Sure glad I took your advice on everything you told me to do
before I installed your ECM.
Especially telling me that I needed a new ECM, cam sensor, fuel
solenoid & engine wiring harness.
You were right on Terry!
We installed the complete engine harness, cam sensor, and ECM
and she fired right up.
Great ECM Product and Tech Support!
Best money I ever spent on my truck, runs great, better than she
ever did before!
I'll be spreading the word.
Thank you for the help!
Jason
Customer Problem: Stranded in República
Dominicana
Engine Change over Celect Plus to Celect Engine
Engine won't plug up & wrong ECM.
Hi Jose
I see that your engine was manufactured in 1993 CPL
1669-L10-330hp
Now we need to make sure the ECM that's on it is a part# 3619037
or a 3618046
This is very important and helps tell me what harness and ECM/
calibration we might should use.
This is important because the plug on the engine and harnesses
must be correct or everything is wrong if we guess wrong on this
one.
That means the harnesses and ecm will not plug in to the OEM
Connector on the truck
The 98 freightliner probably had a CelectPlus OEM harness, being
a FRL. 98 glider kit.
So, did someone change the OEM plug to fit the L10 engine
harness/ECM or di someone put a new CelectPlus engine harness in
place of the original L10 harness with a CelectPlus Harness?
This info will help clear up the mystery
Hi Terry
We want you to put together a new ECM and the harnesses and
any other components we need?
Thanks Jose
Hi Jose
I'm sending you The ECM, Engine Harness, cam sensor & fuel
solenoid.
Hi Terry
We got everything today and finished rewiring ECM supply and
put all your parts on like you said.
Just wanted to tell you that the truck fired up without no
problems!
Hi Jose
I get lucky every once in awhile
Have a great day!
Hi Terry
To me that wasn’t lucky, it was a thorough research from your
part.
We got everything you recommended, the ECM, the harness, the
sensors, the solenoid, just like you recommended.
So you’ll know, since the day the ECM arrived first, we
installed it to try it and surely enough the fuel solenoid gave
out, so as soon as we got the one you sent us it worked like a
charm. You can expect recommendations from our behalf!
January 2010 3rd Tip Of The Month
Fault Code 352 Low Power To Sensor Harness.
Listen To a 3 Way ECM Tech Support Phone Conversation With A
Good Customer of Ours. 5 Year Warranty Now Available
January 2010 1st Tip Of The Month
How To Diagnose A N14 Cummins ECM Quickly With A Noid Light
Tells You If The Injectors Are Getting A Signal From The
ECM...N14's Only 5 Year Warranty Now Available
July 2009
Engine Position Sensor?
Know as Cam Sensor Has
a Life Span of About 5 Years!
Are you having Rough Idle
and Injectors Missing Going on? 5 Year Warranty Now Available
See All Tech Videos Play List on You Tube by Terry Chron
February 2009
Tip of The Month Video!
L10, M11 & N14
Engine Wiring Harness Problems
Maybe It's
Time To Take A Break?
Since There Is
so many people struggling out there
I Found This Video Very Inspirational For Myself
Trust Me On This One! "People
Get Ready"by Crystal Bowersox
VETERANS DAY
This video is a good reminder about our Freedom
Unbelievable Ending in this Video
I FOUND
THESE VIDEOS
ON THE NET
THOUGHT YOU MIGHT FIND THEM A LIL AMUSING!
The Ultimate Dog
Tease.....so Funny
OLDEST ROCKIN ROLL
BAND
SINGING "MY GENERATION"
VERY COOL!
SELF HELP
VIDEOS FOR OTHER PROJECTS
THAT I'M NOT FAMILIAR WITH ON HOW TO DO
REMOVING WINDOW TINT FROM YOUR CAR
WINDOWS
UNBELIEVABLE METHOD THIS GUY HAS WITH HIS HOME
BUSINESS!
My Grandson & Dog
Heavy
Duty Powertrain Inc.
5090 N. Oak Road
Davison, MI 48423
www.heavydutypowertrain.com
sales@heavydutypowertrain.com
ECM Parts
Toll Free 1.866.866.0433
Parts Orders 1.727.787.6495
Español Translation
904.742.8176 Al Ortiz ECM Tech Support
1.727.494.5514
FAX 1.810.653.8929
9:00am to 9:00pm est.
(Open 7 Days a Week)
Heavy Duty Powertrain INC. is the leader in replacement parts
including Engine Computers, Injectors, Flywheel Housings,
Flywheels, Water Pumps, Oil Cooler & After Cooler Elements,
Exhaust Manifolds, Oil Pans etc. for the heavy duty industry. We
are committed to offering you the finest quality at the most
competitive prices.
ALL OEM MANUFACTURERS PICTURES, NAMES, NUMBERS AND DESCRIPTIONS
ARE USED FOR REFERENCE ONLY AND DO NOT IMPLY THAT ANY PART OF
OUR PARTS ARE PRODUCTS OF ORIGINAL EQUIPMENT MANUFACTURER
10yrs
Experience...by Terry Chron
MD200 Video Presentation
