Heavy
Duty Powertrain Inc.
5090 N. Oak Road
Davison, MI 48423
Website Address:
www.heavydutypowertrain.com
Email:
sales@heavydutypowertrain.com
Parts Department Toll Free 1.866.866.0328
ECM Tech Support (810) 653.6300
9:00am to 9:00pm est. (Open 7 Days a Week)
Español Translation
(904) 742.8176 Al Ortiz
Cummins L10, M11 & N14 ECM Before You Install
Your ECM Tips 10yrs
Experience...by Terry Chron
Troubleshooting Videos, Including Explanation of Fault Codes & more!Fax In Your ECM Order Now
Pricing Range $350.00 to $1050.00 Each
CUMMINS
Cat &
Flywheels
Pricing Range $500.00 to $800.00 Each
Ford, Mack & Navistar
Flywheels
Pricing Range $400.00 to $700.00 Each
Ford, Mack & Navistar
Flywheel Ring Gears
Pricing Range $100.00 to $180.00 Each
Please Note:
ALL OEM MANUFACTURERS PICTURES, NAMES, NUMBERS AND
DESCRIPTIONS ARE USED FOR REFERENCE ONLY AND DO NOT IMPLY THAT ANY PART
OF OUR PARTS ARE PRODUCTS OF ORIGINAL EQUIPMENT MANUFACTURER.
Heavy Duty Powertrain Customer ECM
Email Replies:
HDP
L10,
M11 & N14 ECM Product & Service Reviews
Customer Problem: Stranded in Florida
Engine won't start & no power to the fuel solenoid.
Customer email reply:
Hi Terry
Sure glad I took your advice on everything you told me to do
before I installed your ECM.
Especially telling me that I needed a new ECM, cam sensor, fuel
solenoid & engine wiring harness.
You were right on Terry!
We installed the complete engine harness, cam sensor, and ECM
and she fired right up.
Great ECM Product and Tech Support!
Best money I ever spent on my truck, runs great, better than she
ever did before!
I'll be spreading the word.
Thank you for the help!
Jason
Customer Problem: Stranded in República
Dominicana
Engine Change over Celect Plus to Celect Engine
Engine won't plug up & wrong ECM.
Hi Jose
I see that your engine was manufactured in 1993 CPL
1669-L10-330hp
Now we need to make sure the ECM that's on it is a part# 3619037
or a 3618046
This is very important and helps tell me what harness and ECM/
calibration we might should use.
This is important because the plug on the engine and harnesses
must be correct or everything is wrong if we guess wrong on this
one.
That means the harnesses and ecm will not plug in to the OEM
Connector on the truck
The 98 freightliner probably had a CelectPlus OEM harness, being
a FRL. 98 glider kit.
So, did someone change the OEM plug to fit the L10 engine
harness/ECM or di someone put a new CelectPlus engine harness in
place of the original L10 harness with a CelectPlus Harness?
This info will help clear up the mystery
Hi Terry
We want you to put together a new ECM and the harnesses and
any other components we need?
Thanks Jose
Hi Jose
I'm sending you The ECM, Engine Harness, cam sensor & fuel
solenoid.
Hi Terry
We got everything today and finished rewiring ECM supply and
put all your parts on like you said.
Just wanted to tell you that the truck fired up without no
problems!
Hi Jose
I get lucky every once in awhile
Have a great day!
Hi Terry
To me that wasn’t lucky, it was a thorough research from your
part.
We got everything you recommended, the ECM, the harness, the
sensors, the solenoid, just like you recommended.
So you’ll know, since the day the ECM arrived first, we
installed it to try it and surely enough the fuel solenoid gave
out, so as soon as we got the one you sent us it worked like a
charm. You can expect recommendations from our behalf!
January 2010 3rd Tip Of The Month
Fault Code 352 Low Power To Sensor Harness.
Listen To a 3 Way ECM Tech Support Phone Conversation With A
Good Customer of Ours. 5 Year Warranty Now Available
January 2010 1st Tip Of The Month
How To Diagnose A N14 Cummins ECM Quickly With A Noid Light
Tells You If The Injectors Are Getting A Signal From The
ECM...N14's Only 5 Year Warranty Now Available
July 2009
Engine Position Sensor?
Know as Cam Sensor Has
a Life Span of About 5 Years!
Are you having Rough Idle
and Injectors Missing Going on? 5 Year Warranty Now Available
See All Tech Videos Play List on You Tube by Terry Chron
February 2009
Tip of The Month Video!
L10, M11 & N14
Engine Wiring Harness Problems
Maybe It's
Time To Take A Break?
Since There Is
so many people struggling out there
I Found This Video Very Inspirational For Myself
Trust Me On This One! "People
Get Ready"by Crystal Bowersox
VETERANS DAY
This video is a good reminder about our Freedom
Unbelievable Ending in this Video
I FOUND
THESE VIDEOS
ON THE NET
THOUGHT YOU MIGHT FIND THEM A LIL AMUSING!
The Ultimate Dog
Tease.....so Funny
OLDEST ROCKIN ROLL
BAND
SINGING "MY GENERATION"
VERY COOL!
SELF HELP
VIDEOS FOR OTHER PROJECTS
THAT I'M NOT FAMILIAR WITH ON HOW TO DO
REMOVING WINDOW TINT FROM YOUR CAR
WINDOWS
UNBELIEVABLE METHOD THIS GUY HAS WITH HIS HOME
BUSINESS!
My Grandson & Dog
Heavy
Duty Powertrain Inc.
5090 N. Oak Road
Davison, MI 48423
www.heavydutypowertrain.com
sales@heavydutypowertrain.com
ECM Parts
Toll Free 1.866.866.0433
Parts Orders 1.727.787.6495
Español Translation
904.742.8176 Al Ortiz ECM Tech Support
1.727.494.5514
FAX 1.810.653.8929
9:00am to 9:00pm est.
(Open 7 Days a Week)
Heavy Duty Powertrain INC. is the leader in replacement parts
including Engine Computers, Injectors, Flywheel Housings,
Flywheels, Water Pumps, Oil Cooler & After Cooler Elements,
Exhaust Manifolds, Oil Pans etc. for the heavy duty industry. We
are committed to offering you the finest quality at the most
competitive prices.
ALL OEM MANUFACTURERS PICTURES, NAMES, NUMBERS AND DESCRIPTIONS
ARE USED FOR REFERENCE ONLY AND DO NOT IMPLY THAT ANY PART OF
OUR PARTS ARE PRODUCTS OF ORIGINAL EQUIPMENT MANUFACTURER
10yrs
Experience...by Terry Chron
